3 Signs Your Gutters Need Repair or Replacement

425-252-0444 Get Free Estimate
When it comes to gutters around your home, you probably don’t notice them much from day to day, but if they start to fall into disrepair or become damaged, they can quickly cause a host of problems. Bellevue homeowners should be especially attuned to the health of their gutters, since the Seattle area ranks in the top 10 for most rainy days each year (with an average of about 150). Here are three signs you can look for that might indicate it’s time for gutter repair in Bellevue.

1: There’s No Water Coming Down

The gutters on your home are designed to protect your Bellevue roofing, but if they are clogged with debris and other things the water might not be able to make its way through to the downspouts and out into the yard. Next time it rains, check the downspouts to see if there is water flowing through. If you see just a trickle, or no water at all, now is the time to call a gutter or roof repair company in Bellevue to help.

2: The Gutters Are Separated from the House

In order for your gutters to help channel water from your roofing in Bellevue, they need to be properly fastened to your home. If you notice any areas where the gutter has started to warp or bend, or a place where it is sagging because it has become detached you should contact a gutter repair contractor to help you repair the problem areas.

3: Gutters Show Signs of Rust

Gutters are constructed of metal, so over time even the best ones will often start to show some of the signs of age. One of the most common signs is rusting, which will eventually cause the gutters to develop holes or other problems. Once this happens you will start to see some of the potential damage caused by water flowing off the roof that is not properly channeled away from the home, such as flooding in your basement, damage or cracks to the foundation where water is pooling, damaged landscaping, or slippery walkways. If you have gutters that could use a little bit of work, call gutter repair experts in Bellevue to help.
If your roofing in Seattle is more than 7 to 10 years old, it’s important that you are continually inspecting it to make sure you have not developed a roof leak. Staying on top of roof repairs in Seattle ensures that your roof will last as long as it should and won’t become prematurely damaged so you have to replace it sooner than you would like. You can always hire a roofing contractor to come and inspect your roof if you’re not sure what you should be looking for, but if you prefer to check on your own, here is a quick guide to some of the things that might indicate a leak.

Look for Weaknesses in the Roofing

Water that is coming into your attic or your home is probably finding the “path of least resistance” to get there, which means to find the source of the leak you need to find the spot where water could most easily come through. On the shingles that could be an area where you have missing or loose nails, or it might also be where you have damaged flashing around things like skylights, chimneys, or vents. Another place that is more likely to suffer damage is along the areas where two roof planes intersect—the peaks and valleys.

Check from Underneath

Since the water is leaking from the top of the roof into your home, you can often find the source of the leak from your attic sooner than you would find it from on top of the roofing in Seattle. Go up to your attic during the day (preferably during a rainstorm if you can) and use a flashlight to see if you can find dripping water. The area where it’s dripping isn’t necessarily the source of the leak, so you might have to look up the rafters to see if the water has traveled down from a higher spot.

Inspect the Attic

You can also inspect the attic on dry days to look for signs of excess water, such as mold or mildew growth (which shows up as black streaks on the wood in your attic), wet insulation, or rusted nails and metal hinges on the underside of your Seattle roofing. If you spot any of these signs, call a roofing contractor right away to help you find and fix the source of the leak.